INDO GLOBAL EDUCATION CITY
ABHIPUR - 140109
District Mohali (Punjab)
INDO GLOBAL EDUCATION FOUNDATION
# 244, Sector- 16
"Very Nice Campus & a Brilliant Director - Best Wishes"
Mr. Sanjeev Garg, CEO
Punjab Circle(Aug 11,2008)
"Excellent Environment & I wish the very Best to the students."
Mr. Siddharth Bhardwaj
North Adlabs Films Ltd
BIG 92.7 FM(Aug 11,2008)
"It was a very nice experience & hope we will get good results from the interview."
Ms. Banmala Shardar, HR
IRLE Kay Jay Rolls Pvt. Ltd
PKL(4th Dec 2011)
"Good initiative & effort. Really appreciable. This campus has great way to go."
Mr. Ishlesh Bhaskar
HDFC Bank(Aug 20,2008)
"An excellent effort to educate childern. All the best."
copyright 2010, Indo Global Colleges, All content reserved.Mandatory Disclosure:IGCA Mandatory Disclosure:IGCE
Department of Electronics and Communication is a prestigious and one of the most sought after department of the college. In order to cater to the rising needs for the professionally qualified engineer excelling in the field of Electronics and Communication, this department provides latest facilities in accordance with the various emerging trends in this field.
The labs, with latest technologies and unlimited internet facility, give students a cutting edge in technical exploration and enhance their information search and analysis skills. The project work carried out by the students, as an integral part of the technical curriculum, gives them a chance to understand and explore areas of their interest. Students are encouraged to join various technical and non-technical forums i.e. IETE, ISTE, EDS and Computer society of India which in turn give them horizontal exposure to their engineering concepts and technology.
The laboratory facilities and the highly qualified teachers completely satisfy the educational requirements as defined by the educational setup of any good engineering college. The various laboratories in the department are:
Latest computer systems with softwares like Matlab, Commsim, Multisim, Keil , Xilinx and Ultiboard are available for students of Electronics and Communication Engg for their hands-on training and job experience with the latest emerging technology in this branch.
MICROPROCESSOR AND DIGITAL ELECTRONICS LAB
In addition to the various add on cards, the lab is equipped with the microprocessor kits of 8085, 8086 and Microcontrollers such as 8051, 8951. Complete Digital electronics kits such as Multiplexer, ALU and gates are available with the department for the training of students along with PC, Band project Labs.
The Communication lab is well equipped with the latest measurement and communication devices. The lab boasts of a standard function generators and super heterodyne receivers, a wide range of CRO’s with audio oscillators and high frequency generators. PCM Multiplexing and Demultiplexing kits are also available. For the Digital Communication the deptt. has ASK, PSK, FSK and Delta Modulation Kits.
Sophisticated devices like advanced antenna are present in this Lab. The other instruments used are reflex, klystrons, Gunn Diodes, Wave-Guides, Flonges, Attenuators, Frequency meters, Slotted Sections, probes, Circulators, and Tees.
CONTROL AND INSTRUMENTATION LAB
All the equipments relating to basics of instrumentation such as Kelvin Bridge, Wheotstone bridge, Kelvin Double Bridge are available with the deptt.
For process and control applications the deptt. has PID controllers, Compensators, AC and DC Motor Controllers, AC and DC error controllers.
NETWORK AND ELECTRONIC DEVICES LAB
This lab has the kits relating to passive filters such as Low Pass, High Pass,, Band Pass, Band Stop, Constant-K, m-derived and composite filters.
This lab also has kits for study and analysis of basic active components such as h-parameter study kits for transistors, CB CC and CE configurations of BJT, Biosing circuits for FET and MOSFET.
This lab further has kits for study of OP-Amp and its applications in analog computation, summing amplifier, logarithmic amplifier, Integrator and differentiator.
The deptt. boasts of having the PCB lab in its project for giving the students a platform to build their own projects. The lab has all the equipments needed for PCB manufacturing such as positive negative generator, etching machine, cutting machine, drilling machine, tinner, UV exposure unit etc.
This lab has 20 computers with related design softwares for students to build and check their designs. It also has latest function generators and CROs for providing facility to students to check their on board designs. This provides tremendous confidence in students to work in the industry.